F 250 4WD Pickup V6-4.2L VIN 2 (1998)
Clutch Master Cylinder: Service and Repair
Special Tools
REMOVAL
1. Disconnect the clutch master cylinder push rod from the clutch and brake pedal pivot shaft lever.
NOTE: When replacing clutch master cylinder, remove tubing from vehicle for bench bleeding procedure.
2. Disconnect the Clutch Pedal Position (CPP) switch.
3. Remove the pushpins.
4. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
