F 250 4WD Pickup V6-4.2L VIN 2 (1998)
6. Disconnect the front axle actuator motor assembly.
1
Fully extend the front axle actuator motor shaft.
2
Plug the vacuum ports.
3
Pull the front axle actuator motor assembly out.
4
Push the front axle actuator motor assembly away, disconnecting the lever from the slot in the actuator motor shaft.
7. Remove the front axle actuator motor assembly and boot.
1
Remove the boot.
2
Remove the front axle actuator motor assembly.
8. Remove the front axle housing tube assembly
^
Reposition the front drive axle assembly in the Bench Mounted Holding Fixture.
^
Remove the bolts.
^
Remove the front axle housing tube assembly.
9. Remove the cluster gear clutch thrust washer.