F 250 4WD Pickup V6-4.2L VIN 2 (1998)
2. Install the outer bearing.
^
Position the axle tube in the vise.
NOTE: Bearing is installed correctly when the flange of the tool bottoms out on the tube flange. Use the appropriate side of the Needle
Bearing Replacer to install the outer bearing. Use the Driver Handle and the Needle Bearing Replacer to install the outer bearing.
3. Use the Driver Handle and the Axle Shaft Seal Replacer to install the axle shaft seal.
NOTE: Ensure the axle shaft seal flange is flush with the axle tube.
