F 250 4WD Pickup V6-4.2L VIN 2 (1998)
20. Remove the differential ring gear.
^
Remove the ten differential ring gear bolts.
^
Use a drift punch to separate the differential ring gear from the differential case.
21. Install the differential case in the housing without the ring gear.
1
Position the differential case.
2
Install the bearing caps.
3
Install the bearing cap bolts.
22. Position the Dial Indicator with Bracketry.
1
Rotate the differential case to ensure the differential bearings are properly seated.
2
Position the Dial Indicator with Bracketry.
23. Measure the differential case runout without the ring gear.
1
Rotate the differential case.
