F 250 4WD Pickup V6-4.2L VIN 2 (1998)
3. Index mark the front driveshaft to the front axle universal joint flange.
4. Disconnect the front driveshaft.
1
Remove the four bolts.
2
Carefully disconnect the front driveshaft.
CAUTION: Do not allow the driveshaft to hang unsupported.
5. Use a inch lbs. torque wrench to measure the torque required to maintain rotation of the pinion and record the measurement for reference during
installation.
6. Mark the front axle universal joint flange and index it to the pinion stem.
7. Loosen the pinion nut.