F 250 4WD Pickup V6-4.2L VIN 2 (1998)
Pinion Flange: Service and Repair
Rear 10.25 Inch Ring Gear
Special Tools
REMOVAL
1. Remove the rear brake system.
NOTE: The rear wheels and brake rotors must be removed to prevent brake drag during drive pinion bearing preload adjustment.
2. Mark the driveshaft flange and rear axle companion flange for correct alignment during installation.
3. Remove the four driveshaft bolts, and disconnect the driveshaft.
^
Wire the driveshaft out of the way.
