F 250 4WD Pickup V6-4.2L VIN 2 (1998)
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch. See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )
5. Install the wheel and tire assembly. See: Maintenance/Wheels and Tires/Wheel Fastener
Disassembly and Assembly
NOTE: The outboard joint is not serviceable, if worn replace outboard joint and shaft as a unit.
Special Tools
DISASSEMBLY
1. Remove the front wheel driveshaft and joint, please refer to Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/
Axle Shaft/Service and Repair/ See:
2. Slide the two inboard clamp protectors off the boot clamps.
3. Remove the two inboard front wheel driveshaft joint boot clamp.
