F 250 4WD Pickup V6-4.2L VIN 2 (1998)
7. Remove the two axle shafts.
CAUTION: Do not damage the inner wheel bearing oil seal.
INSTALLATION
1. Lubricate the lip of the inner wheel bearing oil seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. Install the two axle shafts.
CAUTION: Do not damage the inner wheel bearing oil seal.
3. Install the u-washers.
1
Position the two u-washers on the button ends of the axle shafts.
2
Pull the axle shafts outward.
