F 250 4WD Pickup V8-302 5.0L (1986)
Axle Shaft: Service and Repair
Front
Fig. 1 Four wheel drive front axle assembly. 1980---87 F-150 & Bronco (similar to other 1980---87 models exc. 1986---87 F-350 w/Dana 60 Monobeam axle)
EXC. 1986---87 F-350 W/DANA 60 MONOBEAM AXLE
1.
Raise and support front of vehicle.
2.
Remove front tire and brake caliper. Position caliper aside, leaving brake lines attached. Do not allow weight of caliper to hang on brake lines.
3.
Remove spindle and brake splash shield, then the axle shaft, Fig. 1.
1986---87 F-350 W/DANA 60 MONOBEAM AXLE
1.
Raise and support vehicle and remove front wheel and tire assemblies.
2.
Remove brake caliper from rotor and wire to frame.
3.
Remove six Allen head cap screws retaining cap to hub body and remove the cap.