F 250 4WD Pickup V8-4.6L SOHC VIN W (1998)
7. Remove the manual control lever.
1
Remove the outer manual control lever shaft nut.
2
Remove the manual control lever.
CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
8. Remove the transmission range digital TR sensor.
1
Remove the two bolts.
2
Remove the digital TR sensor.
9. Remove the manual control valve detent lever spring.
1
Remove the bolt.
2
Remove the manual control valve detent lever spring.
10. Remove the manual lever shaft retaining pin.
NOTE: Use a shop cloth to protect the transmission case surface.
