ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Charging System > < Battery Ground Cable - Damaged/Hard Engine Starting
Page 1
background image

Battery Cable: All Technical Service Bulletins
Battery Ground Cable - Damaged/Hard Engine Starting

^

HARD START - 7.5L - DAMAGED BATTERY        Article No.

GROUND CABLE

87-1-21

^

BATTERY - GROUND CABLE DAMAGED CAUSING HARD STARTING

LIGHT TRUCK 1983-86 F SERIES

ISSUE:

Hard starting (slow to crank) may be caused by a damaged battery ground cable. During acceleration the engine may roll causing the cable to
stretch and pull apart at the engine attachment eyelet. This condition may also damage the ground wire for the windshield wiper motor to
engine because this circuit will act as a back-up for the damaged battery ground cable.

ACTION:

To correct this, inspect the battery ground cable for damage at the engine attachment eyelet. If it is damaged, install a new longer battery
ground cable (E1TZ-14301-A) using the following procedure.

1.

Remove the battery ground cable at the battery negative terminal.

2.

Remove the battery ground cable at the frame ground attachment.

3.

Remove the battery ground cable at the engine ground attachment.

4.

Install a new longer battery ground cable, E1TZ-14301-A.

5.

Tighten attachments at engine and frame grounds to 17-27 ft.lbs. (23-36 N-m).

6.

Tighten battery ground cable at the battery negative terminal to 5-8 ft.lbs. (7-11 N-m).

PART NUMBER

PART NAME

CLASS

E1TZ-14301-A

Battery Ground Cable

B

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: 14301A
TIME:

0.3 Hr. DLR. CODING: Basic Part No. 14301 - Code: 01

Charging System > < Battery Ground Cable - Damaged/Hard Engine Starting