F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
6. Remove the excess foam butyl from the window opening.
INSTALLATION
1. Apply 8 mm foam butyl (part of EOAZ-19562-A), or equivalent meeting Ford specification WSB-M2G234-C to the rear window frame.
-
Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
2. Install the rear window frame and glass.
1
Position the rear window frame and glass.
2
Tighten the nuts to specification.
NOTE: Loosely install all nuts before tightening.
3. Install the rear door window garnish.
4. If equipped, install the rear door window latch screws.