F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Be sure to destroy and discard removed tow hooks.
7.
Install new tow hooks and tighten bolts to 103 Nm (76 lb-ft).
8.
With the help of an assistant, position bumper and install retaining bolts snug.
9.
Adjust bumper height using dimensions recorded during Step 3. Center bumper side-to-side.
10.
Tighten bumper retaining bolts to 80 Nm (59 lb-ft).
11.
Remove supporting jacks.
12.
Connect block heater power cord retainers to bumper if equipped.
13.
Position splash shield and install push pins.
14.
Clean front bumper.