F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
2. Install the piston seal.
3. Install the dust boot.
4. CAUTION: Be careful not to damage or dislodge the piston seal.
Install the rear disc brake piston.
5. Install the rear disc brake caliper.
Removal and Installation
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch. Failure to do so can result in unexpected inflation or deflation
of the air springs which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Remove the wheel and tire assembly.
