F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
4. Pull to release the three clips and remove the lower instrument panel steering column cover.
5. Disconnect the parking brake control release handle.
1
Remove the screws.
2
Disconnect the release handle from the release cable.
6. Separate the parking brake control from the mounting bracket.
1
Disconnect the parking brake signal switch electrical connector.
2
Remove the parking brake control nuts.
3
Separate the parking brake control from the mounting bracket.
7. Disconnect the cables.
-
Disconnect the front parking brake cable and conduit from the parking brake control.
-
Disconnect the release cable.