ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Brake Shoe|Service and Repair|Page 6184 > < Parking Brake Release Switch|Specifications
Page 1
background image

Parking Brake Shoe: Service and Repair

Special Service Tool(s)

Removal 

1. NOTE:  Make sure the parking brake control is fully released.

Relieve the tension on the parking brake system.
1

Pull the front parking brake cable and conduit.

2

Insert a suitable retainer.

2. WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension

vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result
in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
 

Raise and support the vehicle.

3. Remove the tire and wheel assembly.

Parking Brake Shoe|Service and Repair|Page 6184 > < Parking Brake Release Switch|Specifications