F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
-
Stage 2: Tighten to 35-45 Nm (26-33 ft. lbs.).
-
On 5.4L Engines, tighten both fittings starting at the top in two Stages.
-
Stage 1: Hand tighten.
-
Stage 2: Tighten to 55-65 Nm (41-47 ft. lbs.).
All Vehicles
6. Position the brake booster vacuum hose bracket and install the nut.
7. Install the front fender splash shield.
8. On 4x4 vehicles, install the front wheel opening molding.
9. Lower the vehicle.
