F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Air Door Actuator / Motor: Service and Repair
Air Door Actuator
Air Inlet Door
REMOVAL
1. Remove the plenum chamber.
2. Remove the air inlet door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Remove the air inlet door vacuum control motor.
-
Rotate the vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Defrost Door
REMOVAL
1. Remove the panel/defrost door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the push nut.
3
Remove the screws.
4
Remove the panel/defrost door vacuum control motor.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door
REMOVAL
