F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Transmission Position Switch/Sensor: Service and Repair
4R70W
Special Tools
1. Raise and support vehicle.
2. Disconnect the manual lever shift control cable.
3. Disconnect the digital TR electrical connector.
4. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the nut.
2
Remove the lever.
5. Loosen the digital TR sensor bolts.
6. NOTE: Manual shift lever must be in the neutral position.
Use digital transmission range TR Sensor Alignment Tool, to align the digital TR sensor slots. The tool is designed to fit snug.