F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
6.
Disengage and remove red locking spacer from C247F connector and insert Circuit 999 (LB/W, jumper XL3Z-14A411-BA) into connector
location Pin # 3 (Figure 2). Reinsert red locking spacer. Spot tape jumper circuit along -14401-harness to the -14A005- harness.
7.
Reconnect -14401- connector to -14A005- 16-way connector and reattach to finger bracket.
8.
Reinstall left kick panel and scuff plate.
9.
Reassemble instrument panel fuse junction panel and GEM per Workshop Manual, Page 419-10-3.
10.
To functionally test repair, ensure either the driver/passenger door is open, press lock button on key fob twice, and listen for two horn chirps.
11.
Connect New Generation Star (NGS) Tester to the vehicle and clear all codes. Then test RAP and GEM modules for any system failure induced
during the repair procedure.
PART NUMBER
PART NAME
XL3Z-14A411-BA
Jumper Harness
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
992103A
Repair Door Ajar Circuit
0.9 Hrs.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
14A411
39
OASIS CODES: 112000, 203000, 203200, 205000