F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
4. Remove the RCM and bracket assembly.
1
Remove the bracket retaining bolts.
2
Remove the RCM and bracket assembly.
INSTALLATION
1. To install, reverse the removal procedure.
WARNING: The tightening torque of the restraints control module (RCM) retaining bolts is critical for correct system operation.
NOTE:
-
Repair is made by installing a new part only. If a new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
-
Make sure to tighten the retaining bolts to specification.