F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Special Tool(s)
REMOVAL
1. Remove the upper rear corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the rear safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the rear safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation. The SuperCab rear retractor anchor should be positioned with the
vertical leg facing outboard.