F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Suspension Mode Switch: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Turn the air suspension switch to the OFF position.
3. Disconnect the air suspension switch electrical connector.
4. Remove the air suspension switch bracket bolt.
Installation
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
To install, reverse the removal procedure.
