F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Tie Rod End: Service and Repair
Outer
Special Tool(s)
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Mark a reference point from the tie rod end to the front wheel spindle tie rod adjusting sleeve.
4. Remove the outer tie rod castellated nut.
1. Remove the cotter pin.
2. Remove the nut.
