F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
10. WARNING: Lower the rear axle only enough to gain access to the rear spring.
On air suspension vehicles, separate the rear spring from the rear axle.
1. Remove the nuts.
2. Remove the U-bolts.
3. Remove the rear spring plates.
4. Carefully lower the rear axle.
5. On 4x4 vehicles, remove the rear spring spacer.
11. WARNING: Do not remove an air spring under any circumstances when there is pressure in the air spring. Do not remove any
components supporting an air spring without either exhausting the air or providing support for the air spring to prevent vehicle damage
or personal injury.
Remove the rear spring.
1. Remove the bolt and nut.
2. Remove the bolt and nut.
3. Remove the rear spring.
Installation
1. Install the rear spring.
1. Position the rear spring.
2. Install the nut and bolt.
3. Install the nut and bolt.
