F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
6. Using C-Frame and Clamp Assembly Tool, press the lug bolt from its seat and discard.
Installation
CAUTION: Never use air tools to install lug bolts. The serrations can be stripped from the stud.
1. Insert a new wheel stud in the hole in the axle flange or hub flange, making sure serrations are aligned with those made by the original lug bolt.
2. Seat new wheel stud in axle flange or hub flange.
^
Place four flatwashers over the outside end of the wheel stud.
^
Thread a standard lug nut with the flat side against the washers.
^
Tighten the lug nut until the wheel stud head seats against the back side of the flange.
3. Remove the lug nut and flatwashers.
4. Install the brake disc, rear disc support bracket and the rear disc brake caliper, if so equipped. If drum brake, proceed to Step 5.
5. Install the rear brake drum.
6. Install the wheel and tire assembly.
