ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid - A/T|Service and Repair > < Fluid - A/T|Capacity Specifications|Page 4456
Page 1
background image

Fluid - A/T: Description and Operation

1. Normal maintenance requires periodic automatic transmission fluid changes. If a major service, such as a clutch, band, bearing, etc., is required,

the automatic transmission fluid will also have to be removed for service. At this time, the torque converter, transmission cooler, cooler inlet tube
and cooler tube must be thoroughly flushed to remove any dirt. When used under continuous or severe conditions, the transmission and torque
converter should be drained and refilled with fluid.
-

Normal Maintenance
No recommended changes

-

Special Operating Conditions
Change fluid at 48,000 kin (30,000 miles)

2. CAUTION:  Use of a fluid other than specified could result in transmission malfunction and/or failure. 

Refer to the vehicle certification label affixed to the LH front door lock face panel or door pillar for the transmission code.

3. When filling a dry transmission and torque converter, refer to Specification. Check the fluid level.

Fluid - A/T|Service and Repair > < Fluid - A/T|Capacity Specifications|Page 4456