F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
3. NOTE: Coat the inner and outer direct clutch piston seals, clutch cylinder sealing area and piston inner sealing area with petroleum jelly.
Use (A) Direct Clutch Lip Seal Protector to install the (B) direct clutch piston.
4. Install the piston return spring and retainer assembly.
5. Use (A) Clutch Spring Compressor to compress the piston return spring and install the (B) retaining ring.
6. NOTE: Before assembly, soak new clutch discs in transmission fluid for 15 minutes.
Install the clutch pack retaining ring.
1
Alternate external spline (steel) plates and internal spline (friction) plates, starting with a steel plate and ending with the friction plate.
2
Install the clutch pack retaining ring.
