F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
5. Remove the shift solenoid and the Torque Converter Clutch (TCC) solenoid.
1
Remove the bolts.
2
Remove the shift solenoid and the Torque Converter Clutch (TCC) solenoid.
6. Remove the manual valve detent spring
1
Remove the bolt.
2
Remove the manual valve detent spring
7. Remove the 23 valve body to case bolts.
8. Remove the main control valve body and discard the pump outlet screen.
Installation
1. NOTE: Make sure that the drive pin of the manual valve detent lever assembly engages the manual valve in the proper location prior to installing
the bolts.
Position the main control valve body gasket and main control valve body using the two alignment bolts as a guide.