F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
Use the pry bar and the wood block to remove the differential case from the rear axle housing.
9. Remove the ring gear bolts.
10. CAUTION: Care should be taken not to damage the ring bolt hole threads.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes. Drive off the ring gear and, if necessary, the anti-lock speed sensor ring.
11. Install the differential case.
1
Position the differential case assembly, including bearing clips and shims, in the carrier.
2
Install the differential bearing caps.
3
Install the differential bearing cap bolts.
12. Position the Dial Indicator with Bracketry.
