F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
7. NOTE: Remove the collapsible spacer and discard it.
Use the Bearing Pulling Attachment to remove the pinion bearing.
8. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
If the pinion bearing cups are to be replaced, tap alternately (with a brass drift of suitable length) on the opposite side of the cups during removal
to prevent cups from cocking in the casting.
Installation
1. Drive the outer pinion bearing cup into the axle housing, using the Pinion Bearing Cup Replacer (Outer) and the Driver Handle.
2. Drive the inner pinion bearing cup into the axle housing, using the Pinion Bearing Cup Replacer (Inner) and the Driver Handle.
