F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
2. Install a new bearing cup into the driveshaft center yoke.
1
Start a new bearing cup into the driveshaft center yoke.
2
Position the driveshaft center yoke in the U-joint Tool.
3
Press the bearing cup below the driveshaft center yoke surface.
-
Rotate the driveshaft 180° and repeat for the other bearing cup.
3. Install a new centering cup spring.
4. Install four new snap rings.
5. Install a new bearing cup into the driveshaft centering socket yoke.
1
Start a new bearing cup into the driveshaft centering socket yoke.
2
Position the new spider in the driveshaft centering socket yoke.
3
Position the driveshaft centering socket yoke in the U-joint Tool.
4
Press the bearing cup below the driveshaft centering socket yoke surface.