F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
5. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
6. Install the wheel and tire assembly.
Disassembly and Assembly
Special Tools
Disassembly
1. Remove the front wheel driveshaft and joint, please refer to Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/
Axle Shaft/Service and Repair/ See:
2. Slide the two inboard clamp protectors off the boot clamps.
3. CAUTION: Be careful not to damage the front wheel driveshaft joint boot.
Remove the two inboard front wheel driveshaft joint boot clamp.
