F 250 4WD Pickup V8-5.4L SOHC VIN L (1999)
7. CAUTION: Do not damage the inner wheel bearing oil seal.
Remove the two axle shafts.
Installation
1. Lubricate the lip of the inner wheel bearing oil seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Do not damage the inner wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washers on the button ends of the axle shafts.