F 250 4WD Pickup V8-6.9L DSL (1983)
Stabilizer Bar: Service and Repair
Front
1.
Disconnect both ends of stabilizer bar from link assembly on I-beam bracket.
2.
On 1986---87 F-350 models equipped with Dana 60 Monobeam axle, remove nuts, washers and bolts securing links to mounting brackets.
3.
Remove stabilizer bar attaching bolts and the stabilizer bar. On 1980---87 F-150 4 4 and Bronco models, the coil spring must be removed to
facilitate removal of the stabilizer bar mounting bracket.
4.
Reverse procedure to install.