F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Brake Hose/Line: Description and Operation
Brake Line
WARNING: Copper tubing should not be used in the hydraulic system. Use only sae j526 or j527 steel tubing, or equivalent.
NOTE: If a section of the brake tube is damaged, Replace the entire section with tubing of the same type, size, shape, and length. Be careful not to kink
or crack the tubing when bending it to fit the frame or rear-axle forms.
Steel tubing is used in the front brake tube (2264) between the brake master cylinder and the front brake tube connector, between the rear brake tube
connector and the rear brake cylinders and between the brake master cylinder along the frame rail to the flexible hose connected to the rear brake tube
connector.
