F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Engine Mount: Service and Repair
Front
REMOVAL AND INSTALLATION
1. Disconnect battery ground cables.
2. Remove fan shroud halves.
3. Raise and support vehicle.
Fig. 2 Engine Mounts
4. Remove mount to crossmember attaching nuts.
5. Disconnect muffler inlet pipes at exhaust manifolds.
6. Remove engine mount to block attaching bolts.
7. Lower vehicle.
8. Install suitable engine lifting equipment.
9. Lift engine enough to remove mounts and brackets.
10. Reverse procedure to install.