F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Crankshaft Gear/Sprocket: Service and Repair
Timing Gear
REMOVAL AND INSTALLATION
1. Remove front cover.
2. Remove crankshaft drive gear, then the camshaft drive gear using tool No. T83T-6316-A, or equivalent. When removing crankshaft drive gear, use
a breaker bar to prevent crankshaft rotation.
Fig. 14 Timing Gear Alignment
3. Reverse procedure to install. Align timing marks as shown.
NOTE: The crankshaft drive gear may be heated in an oven to 300-350 degrees F, to ease installation.
