F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
1. Check for missing or damaged garter spring. If spring is damaged or missing remove damaged spring with small hooked wire and install a new
spring.
2. Clean fittings and install new O-rings. Use only specified O-rings supplied in E35Y-19D690-A kit. Lubricate with clean refrigerant oil. Insert
white indicator ring into cage on male fitting. Assemble fitting together by pushing with a slight twisting motion.
3. White indicator ring will pop free of cage on male fitting when joint is fully made. This indicates that garter spring inside cage of male fitting is
properly seated over lip of female connector.
