F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
NOTE: Fuel supply tubes and the various fuel lines need not be serviced as assemblies. They may be cut, squared and formed out of rolls of fuel
system service tubing and hose material available at dealerships, or a service part may be purchased. A damaged section of tubing longer than 305
mm (12 inches) can be cut out of the existing line and replaced by a comparable service tubing section, spliced into the line by means of
connecting hoses and retaining clamps. A damaged section of tubing shorter than 305 mm (12 inches) can be cut out of the line and replaced by a
length of service hose and two retaining clamps. All replacement hoses must be cut to a length and inside diameter that will ensure proper clamp
retention.
