F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
1. Grasp the belt tongue and pull down on the belt webbing closest to you to form a loop through the upper (narrow and longer) slot in the tongue.
2. Working within the upper slot, rotate and fold the belt webbing over itself as required to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the tongue.
4. Repeat the above steps to complete the removal of the twist at the lower (wider and larger) slot in the tongue.
Safety Belt Twisted at the Shoulder Belt Guide
NOTE: These procedures affect both wire-formed and stamped D-ring designs.
1. Grasp the belt webbing at shoulder belt guide ("D" Ring).
2. Rotate and fold the belt webbing over itself to remove the twist.
Seat Belt With Anchor Plate Thread Damage
1. Remove the broken or stripped bolt and discard.
2. Drill out the internal threads in the seat belt anchor plate with a 27/64-inch drill.
3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
4. Blow out the chips.
5. Install the attachment parts.
