F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Wheel Hub (Locking): Service and Repair
With Automatic Hubs
Automatic Locking Hubs
Removal
CAUTION: Do not drop spring, ball bearing, bearing race, or retainer.
1.
Separate cap from body assembly by removing the five capscrews, using Torx® bit TX25 or equivalent, from the cap.
2.
Remove cover.
3.
Remove rubber seal.
4.
Remove seal bridge retainer (small metal stamping) from retainer ring space.
5.
Remove retainer ring by closing the ends with needlenose pliers while pulling hub lock from front disc brake hub and rotor.
