ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Automatic Transmission Dipstick - Dipstick Tube: > < Control Module, A/T|Description and Operation
Page 1
background image

Automatic Transmission Dipstick - Dipstick Tube: Customer Interest
A/T - E4OD Fluid Level Indicator Damaged

Article No. 
94-16-21

08/10/94

TRANSMISSION - E40D - FLUID LEVEL INDICATOR DAMAGED ON VEHICLES BUILT THROUGH 2/10/94 WITH A 7.3L INDIRECT
INJECTION TURBO DIESEL

LIGHT TRUCK:
1994 F-250, F-350

ISSUE:
The transmission Fluid Level Indicator may be difficult to install into the Transmission Fluid Fill Tube on some vehicles. This is caused by the plastic
end of the fluid indicator binding on the roll of metal where the fill tube seal sits.

ACTION:
Replace the old fill tube and seal with a new service fill tube and seal. If the Fluid Level Indicator is damaged (bent or broken) replace the old indicator
with a new service indicator. Refer to the 1994 F-Series Service Manual, Section 07-01A, for the removal and installation procedures.

PART NUMBER

PART NAME

CLASS

F4TZ-7A228-C

Transmission Fill Tube

C

87034-S94

Transmission Fill Tube

Seal

BS

F3TZ-7A020-A

Transmission Fluid Level

C

Indicator

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION

TIME

941621A

Replace Fluid Level

0.4 Hr.

Indicator, Tube and Seal

DEALER CODING 

BASIC PART NO.

CONDITION CODE

7A228

41

OASIS CODES: 504000, 610000

All Technical Service Bulletins for Automatic Transmission Dipstick - Dipstick Tube: > < Control Module, A/T|Description and Operation