F 250 4WD Super Duty V10-6.8L (2002)
5. Install the pushpins.
6. Install the interior liftgate handle.
Moulding - Window Garnish, Rear Door, SuperCab
REMOVAL
1. Remove the screws to the rear window latch.
2. Position the latch out of the way.
3. Pry the moulding to remove.
NOTE: The weatherstrip must be removed. It is fastened on top by a pushpin.
INSTALLATION
1. To install, reverse the removal procedure.
Moulding - Windshield Side Garnish
REMOVAL
NOTE: Right side shown, left side similar.
1. Remove the right front inside assist handle covers.