F 250 4WD Super Duty V10-6.8L (2002)
6. Remove the suction accumulator/drier bracket clamp bolts and remove the suction accumulator/drier.
7. Remove the A/C cycling switch from the suction accumulator/drier.
INSTALLATION
1. To install, reverse the removal procedure.
^
Service the replacement suction accumulator/drier with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.
^
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
CAUTION: To prevent damage to the fitting and tube, use a backup wrench when installing the suction accumulator/drier.
