F 250 4WD Super Duty V10-6.8L (2002)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Open the engine air cleaner.
^
Disconnect the MAF sensor electrical connector.
^
Release the air cleaner clamp.
^
Separate the inlet side from the outlet side of the air cleaner.
CAUTION: Do not tamper with the Mass Air Flow (MAF) sensing elements located in the airflow meter. Tampering may result in unit failure.
NOTE: The MAF sensor and body are calibrated and repaired as an assembly.
3. Remove the MAF assembly.
4. Disconnect the MAF sensor electrical connector.
