F 250 4WD Super Duty V10-6.8L (2002)
Starter Relay: Service and Repair
REMOVAL
WARNING: WHEN CARRYING OUT MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT HEAVY GAUGE LEADS
ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE WHEN MAINTENANCE IS
COMPLETE.
1. Disconnect the battery ground cable.
2. Remove the relay cover.
3. Disconnect the starter motor solenoid relay switch wires and cables.
1
Disconnect the engine control sensor wiring.
2
Remove the nuts.
3
Remove the cables.
4. Remove the starter motor solenoid relay switch.
1
Remove the bolts.
2
Remove the starter motor solenoid relay switch.
INSTALLATION
1. WARNING: WHEN CARRYING OUT MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT HEAVY GAUGE
LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE WHEN
MAINTENANCE IS COMPLETE.
