F 250 4WD Super Duty V10-6.8L (2002)
7. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash the surface with
water immediately.
Position the clutch hydraulic system in the vehicle.
8. Correctly route the clutch hydraulic tube and attach the clutch hydraulic reservoir to the wiring tray.
9. Install the clutch master cylinder.
-
Compress and twist the clutch master cylinder counterclockwise 45 degrees to lock it to the clutch pedal and support bracket.
10. Seat the clutch master cylinder rubber seal to the bulkhead.
11. Route the clutch master cylinder-to-slave cylinder hydraulic tube under the brake booster reservoir.
