F 250 4WD Super Duty V10-6.8L (2002)
5. Remove, and discard the inline transmission fluid filter, if so equipped.
6. Using the special tool, disconnect the fluid cooler tubes from the fluid cooler.
7. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
Remove the remaining bolts and OTA transmission fluid cooler.
Installation
1. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
Install the OTA transmission fluid cooler.
1
Position the fluid cooler in the vehicle.
2
Install the lower bolts
3
Connect the fluid cooler tubes to the fluid cooler hoses