F 250 4WD Super Duty V10-6.8L VIN S (2001)
Multifunction Electronic Control Modules: Service and Repair
REMOVAL
CAUTION: Prior to removal of the GEM, it is necessary to upload module configuration information to a diagnostic tool This information needs to be
downloaded into the new module once installed.
1. Disconnect the battery ground cable.
2. Remove the instrument panel steering column cover.
1
Unlock the retainers.
2
Remove the instrument panel steering column cover.
CAUTION: Use care when removing the instrument panel steering column cover or damage to the cover locating tab may occur.
3. Disconnect the bulkhead connectors from the instrument panel fuse junction panel.
1
Loosen the bolts.
2
Disconnect the bulkhead connectors.
4. Position the instrument panel fuse junction panel aside.
1
Remove the nuts.
2
Remove the bolts.
